Doktek Technology
ADDRESS: Merkezefendi / Denizli, Türkiye
Machines made in Türkiye
EN

Doktek Technology · November 15, 2026

Most tube laser cutting machines rotate the tube around its axis. As diameter and weight increase, this becomes more difficult. Doktek Technology developed a tube laser cutting machine for pipes up to 1000 mm in diameter that rotates the cutting head around the pipe instead.

Doktek Ø1000 mm rotating-head tube and profile laser cutting machine during installation in our workshop

How do conventional tube lasers work?

For small and medium diameters, chucks hold the tube and rotate it around its axis while the cutting head travels along its length. This arrangement is fast and precise for lightweight tubes.

Why are larger diameters more difficult?

  • Increasing diameter and wall thickness make the pipe much heavier. Rotating it precisely requires very large chucks and powerful drives.
  • Deflection and runout in long, heavy pipes affect cutting accuracy.
  • Loading, aligning and rotating heavy pipe takes time and creates safety risks.

The solution: a rotating cutting head

In a rotating-head system, the pipe rests on fixed supports while the laser cutting head travels around it. Keeping the heavy pipe stationary allows controlled, precise cutting at large diameters. Doktek's machine uses this principle for pipes up to 1000 mm in diameter.

Our machine at work

The videos below were filmed on the rotating-head tube and profile laser cutting machine we installed in our workshop. The machine cuts holes and contours in H-beams and laser-marks the part code directly onto the beam.

Laser cutting holes and contours in an H-beam
Laser marking a part code on an H-beam and cutting holes in the flange

Where is large-diameter pipe cutting needed?

  • Pipelines and industrial process piping
  • Structural steelwork and large-diameter tubular sections
  • Tank, silo and pressure vessel manufacturing
  • End profiles and openings for pipe joints

Send us your cutting requirements, pipe diameter range and wall thicknesses so we can assess suitability together.

FAQs

YOUR QUESTIONS ANSWERED

What pipe diameters can the machine cut?

Doktek's rotating-head tube laser cutting machine was developed for pipes up to 1000 mm in diameter. Suitability for your wall thickness and material is assessed during the quotation process.

How does a rotating head differ from rotating the pipe?

The heavy pipe remains stationary while the cutting head moves around it. This removes the accuracy and safety challenges associated with rotating large, heavy pipes.

Knowledge center

MORE ARTICLES

Get a quote for your machine. Tell us what you need, and we'll work with you to define the right configuration.