Doktek Technology
ADDRESS: Merkezefendi / Denizli, Türkiye
Machines made in Türkiye
EN

Doktek Technology · November 15, 2026

A fiber laser's cutting capacity depends on laser power, material, assist gas and the required cut quality. The table below gives approximate values commonly used as general industry guidance.

Approximate maximum cutting thickness by power

Laser powerMild steelStainless steelAluminum
1 kW~10 mm~4 mm~3 mm
2 kW~16 mm~8 mm~6 mm
3 kW~20 mm~12 mm~10 mm
6 kW~25 mm~20 mm~16 mm
12 kW~40 mm~40 mm~30 mm

These are general industry values for maximum cutting thickness, not measured specifications for a particular machine. Cut quality varies with the laser source, cutting head, assist gas and material quality.

Maximum thickness and productive working range

At a machine's maximum cutting thickness, cutting slows down and edge quality declines. For clean, fast cutting in series production, thicknesses up to roughly two-thirds of the maximum are generally considered a practical working range.

How do you choose the right power?

  • Base your choice on the thickness you cut most often rather than the thickest sheet you rarely process.
  • Nitrogen is used for clean edges on stainless steel and aluminum, which requires more power.
  • Reflective metals such as copper and brass need a suitable laser source and adequate power.
  • Speed also matters: higher power cuts the same thickness faster, increasing production capacity.
FAQs

YOUR QUESTIONS ANSWERED

How thick can a 3 kW fiber laser cut?

As general guidance, up to approximately 20 mm in mild steel, 12 mm in stainless steel and 10 mm in aluminum. The practical working range for series production is somewhat lower.

What laser power should I choose?

Tell us the materials and thicknesses you cut most often and your monthly output. We'll help select the power for your application.

Knowledge center

MORE ARTICLES

Get a quote for your machine. Tell us what you need, and we'll work with you to define the right configuration.