Doktek Technology
ADDRESS: Merkezefendi / Denizli, Türkiye
Machines made in Türkiye
EN

Doktek Technology · November 19, 2026

When an off-the-shelf machine does not suit your product, capacity or available space, a machine can be designed for the job. Start by telling your custom machine builder what the machine needs to do and what result you expect. This guide explains how custom machine manufacturing works, what to prepare for an initial discussion and which decisions need to be settled before the build begins.

Machine frame built in the Doktek workshop

When do you need a custom machine?

When comparing standard machines, consider how the product will be fed in, what operation is needed and how it will leave the machine. A custom design is worth considering if available machines cannot handle that flow. Typical situations include:

  • Product size or shape varies: irregular natural products cannot all be held or moved in the same way.
  • The machine must connect to an existing line or fit into a small production area.
  • Standard machines cannot meet the required capacity with the way they operate.
  • Manual work is slow, physically demanding or difficult to keep consistent across products.
  • There is no off-the-shelf machine for that product and operation.

The process, step by step

The process runs from defining the need to commissioning at your factory. Product, capacity and layout are considered together at each stage; manufacturing should begin once the concept is clear.

What happensWhat you provide
Define the needDefine the product, operation and target capacityDescribe the job and expected result
Site visit and samplesReview the current process, production space and product samplesProvide samples and access to the production area
Concept and proposalPrepare the operating concept, scope and proposalReview the proposed solution and scope
Mechanical, electrical and software designDesign the mechanical structure, electrical panel and control softwareApprove the 3D model and layout
Manufacturing and assemblyBuild and assemble the machine in our own workshopReport any product or process changes
Trial runTest the machine with the customer's actual productSupply trial products and review the results together
Shipping, installation and commissioningShip, install and run the machine at your factoryPrepare the installation area and agreed utility connections

What to prepare for the initial discussion

  • Describe the product and, where possible, prepare samples that represent its variations.
  • State the target capacity in units/hour or kg/hour.
  • Share the smallest and largest product dimensions and any variations in shape.
  • Prepare photos or a short video of the current manual process and the space set aside for the machine.
  • Describe the available electricity supply and compressed air infrastructure.
  • Explain hygiene and material requirements, such as whether food-contact parts need to be stainless steel.
  • Tell us how many operators you want to run the machine.

What is settled during design?

Design needs to settle how the operator will load and unload the product as well as how the machine will work. At Doktek, electronics, software and mechanical engineers work in the same team, so mechanical design, electrical panels and control software are developed together.

  • The 3D model and layout should be approved before manufacturing, with the footprint, product flow and maintenance access reviewed together.
  • The same team designs the electrical panel, sensors, PLC and operator panel software, coordinating motion with the controls.
  • Safety measures such as emergency stops, guards and doors with safety switches should be addressed during design.
  • If needed, critical movements can be tested on a prototype before manufacturing begins.

What affects the schedule and cost?

The schedule and cost of custom machine manufacturing depend on the scope of the job. Once the product handling method and required equipment are clear, the proposal and project schedule can be reviewed together.

  • Number of stations and movements: linked operations add to the design and assembly work.
  • Required precision and speed: these determine the motion system and control requirements.
  • Material choices: a need for stainless steel affects manufacturing methods and cost.
  • Machine vision or robots: these may require additional design and trials.
  • How often the product changes: this affects the adjustments needed between product sizes.
  • Availability of seasonal products: products such as dried figs may restrict when trials with actual products can take place.

After delivery

After delivery, a machine may need maintenance, repair or adaptation to changing production needs. Doktek Technology repairs and modernises industrial and custom machines, including renewal of control systems, software and the mechanical parts that need replacing. It also offers maintenance and repair services for laser cutting machines.

Doktek Technology designs and builds project-specific machines in Denizli, Türkiye. Both one-off machines and series production of the same machine are possible. Describe your product and the job, and send a short video of the manual process; we will propose a solution suited to your needs.

FAQs

YOUR QUESTIONS ANSWERED

Do I need drawings to commission a custom machine?

No. Describe your product, the operation and the target capacity; we prepare the technical solution and drawings.

Can I order a single machine?

Yes. We build one-off custom machines, and series production of the same machine is also possible.

How long does it take to deliver a custom machine?

The schedule depends on the project scope and the design and trials required. Once the concept is clear, we agree the project and delivery schedule together.

Knowledge center

MORE ARTICLES

Get a quote for your machine. Tell us what you need, and we'll work with you to define the right configuration.